Siding Installation and Replacement in Brookfield, WI
Siding replacement in Brookfield, WI from T and J All In Remodeling on Georges Avenue: vinyl, insulated vinyl, fiber cement and engineered wood hung over sound sheathing, with the old siding stripped, the house wrapped and every opening flashed.
Old siding removed, not covered · Every window flashed · One written price
4.9 ★
60+ Google reviews
A+
BBB Accredited
30+
Years combined experience
Brookfield at a glance
What Does Replacing Siding on a Brookfield House Involve?
More than the boards you see. A Brookfield wall stays dry through a Wisconsin winter only when the sheathing is sound, the house wrap drains outward and every window, door and roof joint is flashed.
Scope
From one wall to the whole house
Scope runs from a single damaged wall to every elevation, set by what the sheathing shows once the siding is off.
Behind the siding
Wrap and flashing
Wrap overlapped top over bottom so water sheds out, with flashing at each opening and roof-to-wall line.
Permit
Checked for you
Permit rules depend on whether you are in the City or the Town of Brookfield, and T and J checks your parcel and files if needed.
Our Brookfield scope
What Siding Work Can T and J Handle on a Brookfield House?
Storm repairs, single elevations and full re-sides, sized to the condition of the wall behind the cladding. Each wall is stripped, checked, wrapped and flashed before new siding goes up.
Full re-side
Full siding replacement
A full re-side strips every board to the sheathing, swaps soft or delaminated panels and wraps, flashes, trims and clads the whole house, the only way to rebuild the weather barrier on every wall at once.
Scope
Whole house
Layers
Sheathing, wrap, flashing
Materials
Vinyl, fiber cement or engineered wood
Repair
Storm damage and section repairs
Hail-, wind- or rot-damaged sections come out and the wall behind them is repaired. Matching an older profile and color is closest when a full elevation is replaced rather than a patch.
Scope
One wall or section
Causes
Storm, impact, rot
Match
Profile and color sourced
Premium cladding
Premium fiber cement and LP-style wood siding
Heavier boards and shakes with a sharp wood look and good impact resistance. Clearances above roofs and grade and sealed board ends are planned into the trim and flashing layout first.
Materials
Fiber cement, engineered wood
Finish
Factory or field painted
Details
Clearances, sealed cuts
Energy upgrade
Insulated vinyl siding
Foam-backed vinyl panels that stiffen the wall and add a continuous layer of insulation over the studs, cutting drafts on older Brookfield homes when paired with a sealed wrap.
Panel
Foam-backed vinyl
Benefit
Stiffer, flatter wall
Pairs with
Sealed house wrap
Trim
Trim, soffit and fascia replacement
Window and door trim is rebuilt over new flashing, and rotted soffit and fascia are replaced, with vented soffit added where the attic needs intake air.
Openings
Window and door trim
Roof edge
Soffit and fascia
Venting
Vented soffit panels
Openings
Siding at replacement windows and patio doors
New windows or a patio door mean cutting the siding back, flashing the unit into the wrap and closing siding and trim around it to match.
Flashing
Sill, jamb and head
Close-in
Matched siding and trim
Pairs with
Window replacement
Finished work
Exterior Cladding Jobs Completed by T and J
Every photo is from a completed T and J re-side or repair, including the stone-and-siding home below.
Full re-side
Lap siding in tan alongside original stone
Gable wall
Window wall re-clad in new lap siding
Rear elevation
Gable with tall glass, re-sided and trimmed
Trim detail
Window where stonework, trim and siding meet
Side elevation
Side wall clad up to the roof edge
The gallery holds more exterior projects.
What it costs
How Much Does Siding Replacement Cost in Brookfield?
Siding replacement in Brookfield is priced after a walkaround on wall area, material, number of stories, trim and the openings to flash. What the sheathing shows once the old siding comes off can move the final number either way.
One section
Siding Repair
Spot repair
- Damaged pieces removed
- Wall behind repaired
- Profile and color matched
- Flashing checked nearby
Most requested
One or two walls
Partial Replacement
Elevation
- Full elevation stripped
- Sheathing replaced as needed
- New wrap and flashing
- Matched trim and corners
Whole house
Full Re-Side
Every wall
- All siding removed
- Weather barrier rebuilt
- Trim, soffit and fascia renewed
- Vinyl or fiber cement
Price your siding first
Use the vinyl siding cost guide for a first range, then confirm it at the walkaround.
Siding materials
Which Siding Holds Up Best on a Brookfield Home?
Fiber cement and engineered wood stand up best to impact and hold paint longest, while vinyl is the low-upkeep budget choice. Each reacts differently to Wisconsin freeze-thaw, sun and wind, and the layers behind it matter as much.
Vinyl Siding
No painting ever; hung loose so it can expand and contract.
Insulated Vinyl
Vinyl with rigid foam behind it for a flatter, warmer wall.
Fiber Cement
Resists hail and fire, repainted only every many years.
Engineered Wood
Broad, deeply textured boards; every cut end gets sealed.
Cedar
Real wood clapboard and shakes, mainly for older or custom homes.
House Wrap
The drainage layer behind the cladding, lapped to shed water out.
Flashing and Kickouts
Metal and membrane at openings, plus kickouts where roofs meet walls.
Vented Soffit
Perforated soffit that feeds fresh air into the attic.
Siding materials compared
Material
Upkeep
Look
Keep in mind
Best fit
Vinyl
Wash occasionally, never paint
Traditional lap, Dutch lap or vertical batten
Brittle if struck in deep cold
Lowest-cost full re-sides
Insulated vinyl
Wash occasionally, never paint
Stiffer, flatter wall appearance
Premium over standard vinyl
Drafty walls, energy upgrades
Fiber cement
Long repaint interval
Sharp, wood-like boards and shakes
Heavy; needs roof and grade clearance
Durable, fire-resistant exteriors
Engineered wood
Long repaint interval, sealed ends
Wide boards, deep grain
Ends and gaps must be sealed
Wood appearance, lighter upkeep
Cedar
Stain or paint regularly
Natural wood grain
Needs the most care
Older and custom homes
For wood-look options, the engineered wood siding guide covers cost, lifespan and winter performance.
Home styles
How Does a Brookfield Home's Style Change the Siding Plan?
It sets the profile. Most Brookfield houses date from 1940 to 1999, so long ranch elevations and colonial facades with a brick or stone base make up most re-sides here.
1970s and 1980s Colonials
About 41.5 percent of Brookfield: lap siding, shutters and brick or stone below, renewed in the same profile with better trim.
1950s and 1960s Ranches
About 40.5 percent. Horizontal lap suits the long, low walls, and gables are often set off in board-and-batten or shakes.
Post-2000 Builds
About 15.5 percent. Already mixed materials, so new siding keeps the existing stone or brick proportions.
Split-Levels
Frequent in Brookfield subdivisions; the siding has to tie two wall heights on one face together cleanly.
Where Additions Meet Original Siding
At newer openings and additions, the flashing and closure where old cladding meets new is what keeps the wall dry.
Brookfield permits
Does Replacing Siding Need a Permit in Brookfield?
Sometimes. The City of Brookfield requires a building permit when sheathing, framing or insulation changes, and Inspection Services at (262) 796-6646 can confirm the rule for your address.
T and J confirms the requirement during the walkaround and files and books any inspection, so work does not stall once the old siding is off.
Check locally
Whole-house re-side
Check with the permit office.
Permit
Rotted studs or framing replaced
Structural repair, inspected.
Permit
Bigger or new window and door openings
New headers and framing.
Check locally
Full-wall sheathing replacement
Ask the permit office.
Usually none
Fixing a few damaged boards
Like-for-like fix.
Usually none
Washing or painting siding
Upkeep only.
The build
How Long Does Siding Replacement Take in Brookfield?
Most re-sides run elevation by elevation, so a Brookfield house is never left open overnight, and each wall is finished before the next is opened.
No-cost walkaround · Written price · Nothing paid to start
Week 0
Walkaround and measurements
John circles the house, measures each wall, presses for soft spots and checks flashing at windows, doors and roof lines.
Free, at your house
Selections
Siding, trim, color and one price
You choose siding, trim and color in one meeting, and the price, with an allowance for hidden sheathing, comes back as one written number.
No deposit to start
Lead time
Permit and materials
Permit rules are confirmed, any filing is made, and siding and trim are ordered in matching lots.
Filing handled
Install
Strip, check, wrap, flash
Each wall is stripped to sheathing, damaged panels replaced, and wrap and flashing installed before cladding.
One wall at a time
Finish
Siding, trim and cleanup
New siding and trim go up, nails and scraps are cleared with a magnet sweep, and Teli and John walk the exterior with you.
Owner sign-off
T and J's Google Rating
4.9
More than 60 Google reviewers rate T and J 4.9 for exterior and interior work across Waukesha County.
Where we work
Siding Replacement Around Brookfield
Because T and J is headquartered in Brookfield, siding jobs here are stripped, wrapped and clad by the same crew without long drives between stops.
Waukesha County
Across Brookfield, Elm Grove, New Berlin and Pewaukee, many 1970s to 1990s homes still carry original wood or hardboard siding at the end of its life.
Milwaukee County
In Wauwatosa, West Allis and Milwaukee, older homes can hide two or three layers to strip first.
Lake Country
On open lake lots in Hartland, Oconomowoc and Delafield, walls take the brunt of wind and blowing snow.
Visit or call
Find T and J Headquarters
Every Brookfield siding quote starts with John walking the outside of the house, and T and J headquarters is at 985 Georges Avenue.
T And J All In Remodeling
Brookfield, WI 53045
Monday to Friday
8:00 AM to 5:00 PM
Saturday
8:00 AM to 5:00 PM
Sunday
Closed
Water emergencies
24/7
Common questions
Brookfield Siding Questions
Siding questions? Call (262) 352-9525.
Should old siding be removed before new siding goes on?
Almost always. Some codes allow a second layer, but stripping to the sheathing is the only way to find rot and install a continuous wrap, and covering old siding hides whatever is wrong behind it.
Which siding material lasts longest in a Wisconsin climate?
Fiber cement and engineered wood take impacts best and hold paint for many years, while vinyl never needs painting and shrugs off moisture but can crack if struck in deep cold. Budget, upkeep and the look of the house usually decide between them.
How closely can a siding repair match the original?
Usually close, especially when the repair covers a whole elevation. Profiles and colors are discontinued and older siding fades, so the nearest current product is sourced and held against the wall before anything is installed.
What does house wrap do behind siding?
It is the real water barrier. Wrap catches rain that gets behind the cladding and drains it out before it reaches the sheathing, which only works when it is lapped and taped correctly.
Does re-siding cut energy costs?
Siding by itself changes little. Insulated vinyl, a continuous sealed wrap and tight flashing at windows and doors are what cut drafts on a Brookfield house.
How long does a full re-side take?
House size, number of stories and how much sheathing needs replacing set it. A written schedule comes with the price, and the crew finishes one elevation before opening the next.
More services
Our Other Brookfield Services
Get started
Get a Free Brookfield Siding Walkaround
John walks the exterior, measures every wall, checks flashing and sheathing condition and follows with one fixed written price, free of charge and with no deposit.
Send Your Siding Details
John replies the same working day.
No deposit · No obligation · Details stay with T and J
